How to repair a water damaged phone – water damage repair guide(works for all phones)
We offer unlocking and repair services!
Visit our website: http://www.cellularproz.com/unlock
This technique can be used on most samrtphones and devices. Just make sure that you remove all components and parts from the motherboard before placing in the machine with water.
I used the following tools:
1. Ultrasonic Cleaning Machine
2. Water
3. Container or Bag of Rice
4. Hair Dryer or Heat Gun
Warning: Repairs will void your warranty with the service provider and manufacturer of the device. We are not responsible for any damage caused by attempting this repair.
December 15, 2013 @ 11:21 am
hey, lets use water to clean a water damage phone!
i think u mean u use alcohol IPA99 or something like that, but no way of
using Water. perhaps distilled water, but i dont even recommand that.
Always use ipa alcohol for something like that.
January 15, 2014 @ 1:11 pm
THIS IS THE WORST WATER DAMAGE REPAIR I’VE EVER SEEN. YOU ARE SO DUMB. FOR
REAL.
January 24, 2014 @ 11:14 pm
any spesific water do i have to put in the container? Yes You are right
you can clean water damage phone with water!
February 15, 2014 @ 3:22 am
Never use alcohol or any flammable liquid in an ultrasonic cleaner unless
it is designed for that. Risk of explosion/fire. Use deionized or distilled
water with a small amount of liquid detergent. Then dry thoroughly as per
video.
June 5, 2014 @ 1:38 pm
put the motherboard in a box of silica
you get silica from silica bags and you will find those bags in shoes food
ect or you can buy silica
August 14, 2014 @ 10:51 am
this is by far the stupidest way to fix a water damaged phone! use a
Thirsty Bag and be done with it
December 7, 2014 @ 8:16 am
I am hoping this is when you first started and forgot to remove the video.
Anyone watching please check other videos this is not the best option. At
least go to your local pharmacy and purchase 91% or higher isopropyl
alcohol instead of water. Also a soft toothbrush with the alcohol for
visible corrosion. Forget the rice and let it air dry or low heat to speed
the process. An hour is plenty if you gently shake excess liquid off to
dry.
February 22, 2015 @ 6:50 am
Don’t use isopropyl alcohol as a ultrasonic cleaner solution as others on
here suggest because their is a risk for fire. Use distilled water and a
few drops of dish soap as your ultrasonic cleaner solution and scrub the
board with a toothbrush and isopropyl 91% or higher and let it air dry for
about 48 hours before testing.
February 27, 2015 @ 9:44 am
imagine when you open the rice box you don’t find the phone
April 15, 2015 @ 2:39 pm
Soo. I guess this failed. That symbol @ the end of video looks iffy*