Kut Kwick, Corporation: Heavy Duty Commercial Slope Mower, The SuperSlopeMaster


Special Applications

Steep Slope Mowing: 0° to 40° (84% grade), 72″ cut
Road right-of-ways
Any terrain with vegetated steep slopes

Cutter Assembly: 1/4″ thick steel cutting deck
Cutting Height: 1 1/2″ to 6 1/2″ height adjustment
Blades: Three, 3/8″ thick flat blades
Cut: 72″ wide, hydro-static, rear discharge, out-front rotary mower
Slope: Slope mowing 0° to 40° (84% grade), designed and tested. Has a low center of gravity for safety on the slopes.
Engine: 38HP Yanmar diesel engine, water cooled
Cutter Type: Rotary – 19″ x 6″ puncture proof casters support the cutter deck from the front of the machine
Speed: 8 mph
Tilting Seat: Seat situated at rear extremity of the machine; manually tilted to allow operator to safely and comfortably operate on steep slopes
Steering: Skid steered through twin, closed loop hydraulic drive systems
Hydraulics: Independently powered hydraulic skid steer wheel drives with hydraulic pumps and motors; hydraulically driven cutter deck
Oil Reservoir: 14 gallon hydraulic reservoir with oil/air separator, to prevent foaming, overheating, and water intrusion from condensation
Diesel Fuel Tanks: 17 gallon; dual diesel fuel tanks on the front of the machine away from the operator. The fuel tanks are uniquely designed to eliminate the fuel disruption problem that occurs with steep slope mowing.
Maneuverability: True “zero turn radius” (ZTR), without leaving the slopes
Tires: SSM38-72D: 26″ x 12-12″, 4 ply rated tires, dual drive wheels, 2 on each side of the rear of the machine (2 sets of two wheels)
ROPS: Four point certified Roll Over Protection System (ROPS) with retractable seat belt
Patented design for high production, low maintenance, long life, safe steep slope mowing!

Thanks! You've already liked this