iPhone 6 Water Damage Repair Tech MD 6-20-2015
iPhone 6 Water Damage Repair Tech MD 6-20-2015
www.Tech-MD.com
Join our team and become a tech:
http://www.tech-md.com/#!work-at-home/c194u
iPhone 6 Water Damage Repair Tech MD 6-20-2015
www.Tech-MD.com
Join our team and become a tech:
http://www.tech-md.com/#!work-at-home/c194u
June 28, 2015 @ 6:33 am
I took apart my water damaged iPhone 6 and dried it out and made sure
everything was completely dry before I tried turning it on again. After 24
hours I tried turning it on and luckily it turned on! I let it sit and
charge and after I tried to get into the phone I became aware that the
touch screen wasn’t working nor the touch ID on the home button. I ordered
a new home button and a new LCD Display Touch Digitizer screen, after
installing I turned on the phone and the touch screen and the touch ID
still did not work. I’m completely stumped and don’t know what could be
wrong, any help?
June 29, 2015 @ 1:36 am
My touch id dont work but the rest works and some times the iphone screen
goes blue for a sec then restarts
July 1, 2015 @ 12:29 am
i need help i jumped in a poo and realized right away that my phone was in
my pocket i got out and it turned off i have a extra iPhone 6 with spare
parts
July 1, 2015 @ 2:48 am
No offense but this isnt a professional job. That cheap jewelry ultrasonic
cleaner can cause damage to electronics and you should be using an
electronic cleaner and a sweep frequency ultrasonic. .
Charging 50 bucks to dunk their phone in alcohol seems like a rip off.
Also pulling the cables like that can damage the LCD cable very easily.
July 1, 2015 @ 12:28 pm
where would I be able to get a screw driver like this from ?
July 1, 2015 @ 11:08 pm
im sure they appreciate you posting their number on youtube…. da
July 7, 2015 @ 6:01 pm
do you offer this repair service if I send you a phone?
July 8, 2015 @ 2:56 am
Coming soon Professional Crest ultrasonic cleaner and Branson EC. Lets see
if doing it pro has better results. Also hopefully we will have good
results with bad parts, microphones and screens. I really would like to
get the cost down for customers. Thank you everyone for your support. More
videos will be coming.
July 9, 2015 @ 8:29 am
Hi, we supply the machines to repair it , you may check it from our website
: http://www.shenwangda.com/en/pr.jsp